Product ID:XUPER 185 XFC
MSDS Date:03/15/1993
FSC:3439
NIIN:01-012-1756
MSDS Number: BHBCB

EUTECTIC CORPORATION

40-40 172ND STREET
FLUSHING, NY 11358-2799
US

Emergency Phone: 718-358-4000

Info Phone: 718-358-4000

Cage: EO060

EUTECTIC CORPORATION

CHARLOTTE, NC 28273 US

Telephone: 704-527-9800/ 800-221-1433

Cage: EO060

COPPER (DUST & MIST), BRONZE POWDER

CAS: 7440-50-8

RTECS: GL5325000

Fraction By Weight: 40-50%

OSHA PEL 0.1 MG(CU)/M3 (FUME)

ACGIH TLV: 0.2 MG/M3 (FUME)

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

ZINC

CAS: 7440-66-6

RTECS: ZG8600000

Fraction By Weight: 30-40%

ACGIH TLV: 10 MG/CUM

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

NICKEL (SOLUBLE) (SUSPECTED HUMAN CARCINOGEN BY NTP, IARC,

CAS: 7440-02-0

RTECS: QR5950000

Fraction By Weight: 10-15%

OSHA PEL 1 MG/CUM

ACGIH TLV: 0.05 MG/CUM IC

BORIC ACID, ORTHOBORIC ACID

CAS: 10043-35-3

RTECS: ED4550000

SODIUM TETRABORATE DECAHYDRATE, SODIUM BORATE, BORAX,

CAS: 1303-96-4

RTECS: VZ2275000

ACGIH TLV: 5 MG/CUM

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INHALATION: NOSE & THROAT IRRITATION,
DIZZINESS, NAUSEA, DRYNESS, LUNG & OTHER ORGAN DAMAGE, METAL FUME
FEVER. EYES/SKIN: INJURY & BURNS, POSSIBLE CHEMICAL BURNS.
INGESTION: HARMFUL.
Explanation of Carcinogenicity:SEE INGREDIENTS
Effects of Overexposure:INHALATION: BRONCHIAL ASTHMA, LUNG FIBROSIS,
PNEUMOCONIOSIS (IRON DEPOSITS IN LUNG).

First Aid:INHALATION: REMOVE TO FRESH AIR. SKIN: WASH W/SOAP & WATER TO
REMOVE ALL RESIDUE. EYES: FLUSH THOROUGHLY W/WATER FOR AT LEAST 15
MINS TO REMOVE ALL RESIDUE. INGESTION: CALL PHYSICIAN OR POISON
CONTROL CENTER. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Flash Point:NONFLAMMABLE
Extinguishing Media:CO2, DRY CHEMICAL FOAM TYPE
Fire Fighting Procedures:WEAR APPROVED SELF-CONTAINED BREATHING
APPARATUS.
Unusual Fire/Explosion Hazard:WELDING ARC & SPARKS & BRAZING FLAMES CAN
IGNITE COMBUSTIBLES & FLAMMABLES. CANS UNDER PRESSURE & FLAMMABLES
MAY EXPLODE.

Handling and Storage Precautions:FUMES, GASES & DUST GIVEN OFF DURING
HEATING, WELDING, BRAZING, SOLDERING, CUTTING OR THERMAL SPRAY
PROCESSES CANNOT BE CLASSIFIED SIMPLY.
Other Precautions:ELECTRICAL SHOCK CAN KILL. TRAIN WELDER TO KEEP
HIS/HER FACE AWAY FROM THE FUME/DUST PLUME. TRAIN WORKERS NOT TO
TOUCH LIVE ELECTRICAL PARTS & TO INSULATE THEMSELVES FROM WORK &
ELECTRICAL GROUND.

Respiratory Protection:USE NIOSH APPROVED RESPIRATOR
Ventilation:USE ENOUGH GENERAL & LOCAL EXHAUST AT WORK SITE TO KEEP ALL
FUMES & DUST FROM WORKER'S BREATHING ZONE
Protective Gloves:WELDER'S
Eye Protection:HELMET OR FACE SHIELD W/FILTER LENS
Other Protective Equipment:ARM PROTECTORS, APRONS, HATS, SHOULDER
PROTECTION. PROVIDE PROTECTIVE SCREENS/FLASH GOGGLES.
Supplemental Safety and Health
COMPOSITON & QUANTITY OF FUMES/GASES ARE DEPENDENT UPON METAL BEING
WELDED/PROCESS/PROCEDURES/ELECTRODES OR OTHER CONSUMABLES USED.
OTHER INFLUENCES: COATINGS ON WORKPIECE, NUMBER OF WORKERS & VOLUME
OF WORK SPACE, QUALITY/AMOUNT OF VENTILATION, POSITION OF WELDERS
HEAD TO FUME PLUME & CONTAMINANTS IN ATMOSPHERE.

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:SPARKS & FLAMES
Hazardous Decomposition Products:FLUORIDE COMPOUNDS, METAL OXIDES, CO,
CO2, SILICA, OZONE, NITROGEN OXIDES, & INERT GASES

Waste Disposal Methods:DISPOSE OF WASTE MATERIAL, POWDERS, GRINDING OR
FILTER IN ENVIRONMENTALLY SENSITIVE MANNER IN ACCORDANCE W/FEDERAL,
STATE, & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.